Videoblogging is the next generation of showing your products and services over the internet.
Now you can use videos as a better way to advertise. This form of communication may need a lot of resources, but it is all worth it. If pictures say a thousand words, video on your blog is a far better way to show your product or service.

A video requires larger disk spaces on websites, a faster server, and a whole new set of programs to support it. Video can be fed through RSS. This is the technology of sharing your website to other RSS aggregators.

Videoblogging works with people on the internet expressing themselves. Now if you put this on a business prospective, there are a lot of benefits. It is a powerful tool for showing your prospective customers your line of products or your services. It’s just like showing a commercial all for free. And if you videoblog through RSS, then most probably you are getting your target market.

People like to see what they are going to buy. All of us know the influence of a thirty second commercial. The effect of videoblogging is similar to that. You show your product, people watch it. If they like it, they buy it. If presented well enough, they”ll buy the product even if they don’t need it.

Now on the web, things are pretty much at a standstill, unlike in television. If you post something that is mobile, it would almost certainly catch attention. Now imagine your product showing in all it’s glory in a videoblog. You”d get orders in no time.

If your business is just starting up, you can create a video at home. All you need is your camera, microphone, video software, and lights. And as long as you know how to use your camera, you can create a video to upload to your blog.

Invest in a good web camera. The higher its resolution is the better. And present your goods in the best possible way. Make a short story, Just make sure you are getting the best profile for your product. Get those creative juices flowing.

Lights are important in a production. Make sure you illuminate the area you are going to use to create your video. The brighter the area, the better the images will be. You can also use lighting effects for added appeal to the presentation.

Should you require sounds for your videoblog, you need a microphone. Record you voice as a voice over for promoting the product and its benefit to consumers. Sounds are just as important as pictures on a video. So make your sound effects as enticing as possible.

You will need a video editor software. You need this to finalize your work. You can add sounds, remove some bad angles, or insert some still photos. Some video editors are user-friendly and can be used with zero knowledge. Even simple video editing programs should do the trick. Select your background carefully. The light affects the presentation so make sure that the background and the light complements each other.

Videoblogging is a great tool but it also has it downside. It may slow down the computer so other may steer clear of it. Download time may also be time consuming especially if customer is still on a dial- up connection.

But don’t let this stop you. Let videoblogging be an alternative for you, still keep the text and pictures present as some viewers of your site may prefer to read about your product.

The more creative you are the more likely you are to succeed. Videoblogging offers an alternative way of promoting your product. You involve the customers. You let them see the advantages of your goods or services. And quite often, this is enough to make a sale. href="http://smartinternetmarketingtips.com">visit my blog

Firstly, What is a Penny Stock?

Stocks termed as penny stocks don’t seem to be essentially stocks which trade for a penny. After all normally penny stocks are termed as stocks that trade for beneath 5 dollars. Stocks that trade from a penny downwards are generally termed as sub-penny stocks.

Trading penny stocks can be extraordinarily risky when you do not grasp what you are doing, even more so than trading traditional stocks as a result of they’ll be abundant more volatile when markets move. For example, a simple press unleash can cause penny stocks to suddenly change price. This will be very dangerous since there will be occasions where a stock price rises which might be only due to a number of speculators buying on the back of data circulated across bulletin boards, causing a sharp value rise. Seeing the price rise, alternative investors jump in and buy additional, inflicting the costs to rise higher and then suddenly, the initial purchasers sell causing the value to reverse. If you buy during these times, you’ll realize yourself holding shares that are price far less than you bought them, at intervals a terribly short period of time.

There are several markets in that you can trade penny stocks. Within the United States, these shares will be traded on the pink sheet markets or on the over the counter (OTC) bulletin market. In Canada there’s the TSE and TSE Venture Exchanges that are used to trade penny stocks. A far safer method to trade penny stocks is to use either the NASDAQ tiny cap market or the American Stock Exchange (AMEX). Using either of these, though still risky, are way safer since the businesses trading must file monetary reports that you’ll be able to examine prior to purchasing stocks. But, the downside of trading stocks through these is that the stocks traded have a minimum demand of a worth of one dollar. Pink sheet stocks don’t require and company reports to be filed and usually you can’t even notice out the share structure therefore by nature can be very risky.

Therefore how do you know a smart penny stock?

A good penny stock would generally be one that meets the subsequent criteria.

1. The share value is but 5 dollars.
2. There’s a Profit Margin of greater than one percent.
3. The company in query has a lot of money then debt.
4. The long run projections for the corporate look realistic and achievable.
5. The shares are traded on either NASDAQ or AMEX.

With just a tiny amount of research, following the higher than criteria, it’s possible to seek out good penny stocks.

There is no best or worst company in that to buy penny stocks, whether you profit or not normally depends on your ability to shop for and sell at the correct time. For instance, you’ll purchase what looks a really unhealthy company, but, their value goes up thanks to a press unharness therefore you make money.

Another terribly vital factor in trading penny stocks is to line yourself some strict money management rules. If you get stocks and they move in the incorrect direction, sell them once they reach x percentage loss. Or, if they’re making a profit, sell when they reach x proportion profit. Do not set your profit goal too so much away as often the value modification can reverse at any moment and finish up in you losing. Conversely, set your stop so much enough away to permit for market movement. By setting a stop too shut, you’ll find that as the market normally moves, you may finish up making a loss additional often than winning.

In summary, trading sensible penny stocks is only speculation and relies on you being able to trade without any emotion and following the principles you set yourself religiously. Conjointly keep in mind that each one of the good penny stocks are usually traded either on NASDAQ or AMEX and you’ll be able to notice reports concerning them on services like Reuters.

In 2009, Derek Jeter made baseball history with  2,722 hits!  He is being honored on this brilliant, uncirculated, genuine US Half Dollar that is layered in pure 24K gold.  This coin is a tribute to New York’s team captain and is officially licensed….a limited edition NY baseball half dollar.

I wanted you to know about this because it can be a great gift for any baseball fan…..I’ve already ordered three for my nephews.  However, now that the Yankees have won #27 world championship, this limited edition coin, which is officially licensed and comes with a certificate of authenticity, might have collectors’ value.

Own your piece of baseball history today and get one for every baseball fan in your circle of family and friends.  Check out http://adaptivechaos.com/JeterCoin for details and a special bonus coin.

The photograph on this offer is absolutely stunning.  Enter you email address to find out more about how to get two Blackberry Bolds without a service plan. Take advantage of this interesting offer and find out how to possibly indulge yourself with FREE His and Her Blackberry Bolds!

It’s finally here…The program of 2009

ultimatewealthx.com/RealBiz

Developed by internet mastermind Max
Stiegemeier, the founder of LWS Freedom…

Ultimate Wealth FormulaX is ON Fire!

This instant paying business will explode
your bank account, build your email list,
and make you a residual income superstar.

Get in before anyone else and grab the First
Movers Advantage Now!

Everything that Max creates turns into gold.

Go Quick To:
ultimatewealthx.com/RealBiz

To Our Great Success,

Net Bug Team
Alain Bouy
linkizz.biz/NetbugTeam

Are you seeking the answer to stop sweating naturally? Maybe you have tried to solve sweating problem and nothing has worked, don’t despair. There are many natural treatments stop excessive sweating. Here are three ways to stop sweating that will get you on the right track.

1. Try to Relax. Will stress and anxiety cause sweating? Well, the answer is yes. Your sweating are probably caused by stress and high levels of anxiety. Simple relaxation techniques like yoga and meditation to reduce your anxiety thus help stop your excessive sweating naturally.

2. Diet. If you want to stop your sweating naturally, you should eat a healthy and balanced diet first. Stay away from spicy foods, onions and garlic which make your body smell badly. Reduce caffeine and alcohol intake as they increase your heart’s rate which makes the situation worse. Eat some calcium rich foods like milk, American cheese and yogurt. Calcium is useful to help stop sweating. In addition, fruits, vegetables and natural herbs like Kava, sage is also helpful to prevent sweating.

3. Choose the right clothes. Wearing natural fibers instead of clothing that makes you sweat more. Natural fibers quickly absorb sweat and water that help your body to breathe easier. Do not wear black in summer. Although they are good at camouflaging the sweat stains, they will attract sunlight or even indoor lighting. It will cause you sweat more. So wearing lighter colored clothes will help to reduce your sweating.

You can try the above three natural and safe ways to stop sweating for good and live a healthy life.

Gidday,

Came across a bloke who has a few different websites covering a wide variety of niches. I have made a small list of just a few.
www.ebookearth.com
www.landscaping-portal.com
www.life-changing-ebooks.com
www.e-debt-fix.com
www.garden-landscaping-ideas.com
www.ryinda.com
www.ryinda.com/forgotten-laws/index.php
www.ryinda.com/alzheimers/index.php
www.ryinda.com/digital-photography/index.php
www.ryinda.com/blogging/index.php

There are many more and I may list them at a later date.

If you have questions or advice I can be contacted at martin@emnm.com.au

All the best,
Martin Petersen

relaxzoolander thinks that the club relaxzoolander list is just too long.
There are too many members too manage.
so its time for another episode of ‘relaxzoolander survivor’.

your votes in the poll will decide who will gets the ‘axe’ from the club relaxzoolander list.
since the poll is limited to 10 items….relaxzoolander himself had make the selections of possible victims.
but now its time for YOU to make the final decision….
cast your vote now.

voting rules:
the polling will be over when relaxzoolander says so.
only those members listed on the poll will have votes counted for them.
[no posting of additional names.]
the ‘axed’ member is not necessarily ‘banished’ for life.

thank you for your participation.

Posicionamiento Paginas web

Feminine tattoos are largely sported by girls and adult females and have become very common ever since tattoos became a socially accepted thing to do, which has been possible principally due to the fact that famous people also wear them. Most respectable female tattoo galleries would have a large stock of such patterns which are commonly dainty and small in shape and looks. Common patterns might include a butterfly, a flower or one of the celtic cross tattoo designs. Women’s designs are also less heavy, less opposing looking and they tend to have narrower lines, though this is, of course, a generalization rather than a rule.

Women these days are gradually opting for large tattoos with ‘New school’ hearts, stars, roses and tribal body art patterns on the small of the back increasingly being asked for by females. Today women are prepared to try out tattoos of various flavors, sizes and shapes and keeping this trend in mind, a women’s body art gallery would store all these patterns which are in vogue. For example a celtic cross tattoo or Old English tattoos, once reserved for men, can also be seen on women’s bodies nowadays. Many body art artists and female body art gallery owners think that as far as musicians particularly hip-hop artists are involved, they would only select one particular pattern. The popularity of the lower back and tummy placement suggests that most women still don’t want their tattoos to be too evident and also a desire for a more sexual placement.

Any female body art gallery would normally suggest to their female customers to get the tattoo done either on the small of the back or the ankle although the lower back is an extremely sexy area for getting a tattoo. It seldom shows, but can be ‘flashed’ as the woman bends over, catching a glimpse of a lower back body art on a woman, you almost get the feeling that you’re seeing something you shouldn’t be – very seductive! Although ankle tattoos are by pattern smaller in proportions, the other area that is very popular with women is the shoulder, the left one in particular as this is regarded as the women side. In the ultimate analysis it is all about what suits you best and since this has a near permanent nature, you ought to choose a design, which you would like to see for a long time.

There are so many good body art patterns and custom pieces a tattoo artists can do these days so don’t be tempted to get some designs which will date really fast and end up looking shoddy. Most female tattoos look very likeable and engaging, not offending any sentiment whatsoever, so to get more ideas and concepts regarding body art patterns, do a thorough search on the internet, with the words ‘female tattoos’ and you would be stunned at the results! There are scores of superbly appealing designs out there which can be viewed from the coziness of your home, and then take the print out of your chosen design to get it done by your favorite body art artist.

Before mainstream principles such as “funded proposals” and “attraction marketing” made its participants millions of dollars online, there existed only a vision for the future.

So, as the next generation of savvy entrepreneurs look to what the future holds for this industry, a new vision is being heralded by one man as Web 3.0 Social Profit Streams.

Bob DeCecco cites the “Blue Ocean Strategy” published by the Harvard business review as the next opportunity to capitalize on what corporate entities have yet to realize.

By harnessing the viral power of current media, and monetizing the enormity of the social networking communities, a vehicle has been devised to rapidly grow any existing business on or offline.

Following in the footsteps of pioneering examples such as: Ebay & Cirque Du Soleil, coupled with recent events such as Ashton Kutcher’s Twitter massacre of CNN. Along with Susan Boyle’s Britain’s Got Talent receiving over 50 million views in 3 weeks, the infrastructure is already in place, yet remains to be implemented/monetized industry wide.

By providing a professional environment that appeals to the masses, and trains people how to grow their skill sets, and lists, the framework is in place to shed the negative connotations commonly associated with this industry.

More importantly, business men and women now have a comprehensive platform that equips them with the tools, communication systems, and networking capabilities, to create massive awareness of any product or service they choose to promote.

The founders of Web 3.0 Social Profit Streams have termed this vehicle, the TRAFFICplan.

This bleeding edge approach is designed to virally build any income stream by incentivizing the massive untapped market space (Blue Ocean) through a professional, safe, environment of value based, free training.

Download a free copy of the “Blue Ocean Strategy” at:
Social Profit Streams

Presented By: The Grow Guide

Beginner’s Guide

Introduction:

Growing marijuana indoors is fast becoming an American Pastime. The reasons are varied. With the increased interest and experimentation in house plant cultivation, it was inevitable that people would apply their knowledge of plant care to growing marijuana. Many of those who occasionally like to light up a joint may find it difficult to locate a source or are hesitant to deal with a perhaps unsavory element of society in procuring their grass. There is, of course, the criminal aspect of buying or selling grass; Growing marijuana is just as illegal as buying, selling, or smoking it, but growing is something you can do in the privacy of your own home without having to deal with someone you don’t know or trust. The best reason for growing your own is the enjoyment you will get out of watching those tiny little seeds you picked out of you stash sprout and become some of the most lovely and lush of all house plants.

Anyone Can Do It

Even if you haven’t had any prior experience with growing plants in you home, you can have a successful crop of marijuana by following the simple directions in this pamphlet. If you have had problems in the past with marijuana cultivation, you may find the solutions in the following chapters. Growing a marijuana plant involves four basic steps:

1. Get the seeds. If you don’t already have some, you can ask your friends to save you seeds out of any good grass they may come across. You’ll find that lots of people already have a seed collection of some sort and are willing to part with a few prime seeds in exchange for some of the finished product.

2. Germinate the seeds. You can simply drop a seed into moist soil, but by germinating the seeds first you can be sure that the seed will indeed produce a plant. To germinate seeds, place a group of them between about six moist paper towels, or in the pores of a moist sponge. Leave the towels or sponge moist but not soaking wet. Some seeds will germinate in 24 hours while others may take several days or even a week.

3. Plant the sprouts. As soon as a seed cracks open and begins to sprout, place it on some moist soil and sprinkle a little soil over the top of it.

4. Supply the plants with light. Flourescent lights are the best. Hang the lights with two inches of the soil and after the plants appear above the ground, continue to keep the lights with two inches of the plants. It is as easy as that. If you follow those four steps you will grow a marijuana plant. To ensure prime quality and the highest yield in the shortest time period, however, a few details are necessary.

Soil

Your prime concern, after choosing high quality seeds, is the soil. Use the best soil you can get. Scrimping on the soil doesn’t pay off in the long run. If you use unsterilized soil you will almost certainly find parasites in it, probably after it
is too late to transplant your marijuana. You can find excellent soil for sale at your local plant shop or nursery, K-Mart, Wal Mart, and even some grocery stores. The soil you use should have these properties for the best possible results:

1. It should drain well. That is, it should have some sand in it and also some sponge rock or pearlite.
2. The ph should be between 6.5 and 7.5 since marijuana does not do well in acidic soil. High acidity in soil encourages the plant to be predominantly male, an undesirable trait.
3. The soil should also contain humus for retaining moisture and nutrients.

If you want to make your own soil mixture, you can use this recipe: Mix two parts moss with one part sand and one part pearlite or sponge rock to each four gallons of soil. Test your soil for ph with litmus paper or with a soil testing kit
available at most plant stores. To raise the ph of the soil, add 1/2 lb. lime to 1 cubic foot of soil to raise the ph one point.
If you absolutely insist on using dirt you dug up from your driveway, you must sterilize it by baking it in your oven for about an hour at 250 degrees. Be sure to moisten it thoroughly first and also prepare yourself for a rapid evacuation of your
kitchen because that hot soil is going to stink. Now add to the mixture about one tablespoon of fertilizer (like Rapid-Gro) per gallon gallon of soil and blend it in thoroughly. Better yet, just skip the whole process and spend a couple bucks on some soil.

Containers

After you have prepared your soil, you will have to come up with some kind of container to plant in. The container should be sterilized as well, especially if they have been used previously for growing other plants. The size of the container has a great
deal to do with the rate of growth and overall size of the plant. You should plan on transplanting your plant not more than one time, since the process of transplanting can be a shock to the plant and it will have to undergo a recovery period in which growth is slowed or even stopped for a short while. The first container you use should be no larger than six inches in diameter and can be made of clay or plastic. To transplant, simply prepare the larger pot by filling it with soil and scooping out a little hole about the size of the smaller pot that the plant is in. Turn the plant upside down, pot and all, and tap the rim of the pot sharply on a counter or the edge of the sink. The soil and root ball should come out of the pot cleanly with the soil retaining the shape of the pot and with no disturbances to the root ball. Another method that can bypass the transplanting
problem is using a Jiffy-Pot. Jiffy pots are made of compressed peat moss and can be planted right into moist soil where they decompose and allow the passage of the root system through their walls. The second container should have a volume of at least three gallons. Marijuana doesn’t like to have its roots bound or cramped for space, so always be sure that the container you use will be deep enough for your plant’s root system. It is very difficult to transplant a five-foot marijuana tree, so plan ahead. It is going to get bigger. The small plants should be ready to transplant into their permanent homes in about two weeks. Keep a close watch on them after the first week or so and avoid root binding at all costs since the plants never seem to do as well once they have been stunted by the cramping of their roots.

Fertilizer

Marijuana likes lots of food, but you can do damage to the plants if you are too zealous. Some fertilizers can burn a plant
and damage its roots if used in to high a concentration. Most commercial soil will have enough nutrients in it to sustain the
plant for about three weeks of growth so you don’t need to worry about feeding your plant until the end of the third week. The most important thing to remember is to introduce the fertilizer concentration to the plant gradually. Start with a fairly diluted fertilizer solution and gradually increase the dosage. There are several good marijuana fertilizers on the commercial market, two of which are Rapid-Gro and Eco-Grow. Rapid-Gro has had widespread use in marijuana cultivation and is available in most parts of the United States. Eco-Grow is also especially good for marijuana since it contains an ingredient that keeps the soil from becoming acid. Most fertilizers cause a ph change in the soil. Adding fertilizer to the soil almost always results in a more acidic ph.

As time goes on, the amount of salts produced by the breakdown of fertilizers in the soil causes the soil to become
increasingly acidic and eventually the concentration of these salts in the soil will stunt the plant and cause browning out of
the foliage. Also, as the plant gets older its roots become less effective in bringing food to the leaves. To avoid the
accumulation of these salts in your soil and to ensure that your plant is getting all of the food it needs you can begin leaf
feeding your plant at the age of about 1.5 months. Dissolve the fertilizer in worm water and spray the mixture directly onto the foliage. The leaves absorb the fertilizer into their veins. If you want to continue to put fertilizer into the soil as well as
leaf feeding, be sure not to overdose your plants.

Remember to increase the amount of food your plant receives gradually. Marijuana seems to be able to take as much fertilizer as you want to give it as long as it is introduced over a period of time. During the first three months or so, fertilize your plants every few days. As the rate of foliage growth slows down in the plant’s preparation for blooming and seed production, the fertilizer intake of the plant should be slowed down as well. Never fertilize the plant just before you are going to harvest it since the fertilizer will encourage foliage production and slow down resin production. A word here about the most organic of fertilizers: worm castings. As you may know, worms are raised commercially for sale to gardeners. The breeders put the worms in organic compost mixtures and while the worms are reproducing they eat the organic matter and expel some of the best marijuana food around. After the worms have eaten all the organic matter in the compost, they are removed and sold and the remains are then sold as worm castings. These castings are so rich that you can grow marijuana in straight worm castings. This isn’t really necessary however, and it is somewhat impractical since the castings are very expensive. If you can afford them you can, however, blend them in with your soil and they will make a very
good organic fertilizer.

Light

Without light, the plants cannot grow. In the countries in which marijuana grows best, the sun is the source of light. The amount of light and the length of the growing season in these countries results in huge tree-like plants. In most parts of North America, however, the sun is not generally intense enough for long enough periods of time to produce the same size and quality of plants that grow with ease in Latin America and other tropical countries. The answer to the problem of lack of sun, especially in the winter months, shortness of the growing season, and other problems is to grow indoor under simulated conditions. The rule of thumb seems to be the more light, the better. In one experiment we know of, eight eight-foot VHO Gro-Lux fixtures were used over eight plants. The plants grew at an astonishing rate. The lights had to be raised every day. There are many types of artificial light and all of them do different things to your plants. The common incandescent light bulb emits some of the frequencies of light the plant can use, but it also emits a high percentage of far red and infra-red light which cause the plant to concentrate its growth on the stem. This results in the plant stretching toward the light bulb until it becomes so tall and spindly that it just weakly topples over. There are several brands of bulb type. One is the incandescent plant spot light which emits higher amounts of red and blue light than the common light bulb. It is an improvement, but has it drawbacks. it is hot, for example, and cannot be placed close to the plants. Consequently, the plant has to stretch upwards again and is in danger of becoming elongated and falling over. The red bands of light seem to encourage stem growth which is not desirable in growing marijuana. the idea is to encourage foliage growth for obvious reasons. Gro-Lux lights are probably the most common flourescent plant lights. In our experience with them, they have
proven themselves to be extremely effective. They range in size from one to eight feet in length so you can set up a growing room in a closet or a warehouse. There are two types of Gro-Lux lights: The standard and the wide spectrum. They can be used in conjunction with on another, but the wide spectrum lights are not sufficient on their own. The wide spectrum lights were designed as a supplementary light source and are cheaper than the standard lights. Wide spectrum lights emit the same bands of light as the standard but the standard emit higher concentrations of red and blue bands that the plants need to grow. The wide spectrum lights also emit infra-red, the effect of which on stem growth we have already discussed. If you are planning to grow on a large scale, you might be interested to know that the regular flourescent lamps and fixtures, the type that are used in commercial lighting, work well when used along with standard Gro- Lux lights. These commercial lights are called cool whites, and are the cheapest of the flourescent lights we have mentioned. They emit as much blue light as the Gro-Lux standards and the blue light is what the plants use in foliage growth.

Now we come to the question of intensity. Both the standard and wide spectrum lamps come in three intensities: regular output, high output, and very high output. You can grow a nice crop of plants under the regular output lamps and probably be quite satisfied with our results. The difference in using the HO or VHO lamps is the time it takes to grow a crop. Under a VHO lamp, the plants grow at a rate that is about three times the rate at which they grow under the standard lamps. People have been known to get a plant that is four feet tall in two months under one of these lights. Under the VHO lights, one may have to raise the lights every day which means a growth rate of ate least two inches a day. The only drawback is the expense of the VHO lamps and fixtures. The VHO lamps and fixtures are almost twice the price of the standard. If you are interested in our opinion, they are well worth it. Now that you have your lights up, you might be curious about the amount of light to give you plants per day. The maturation date of your plants is dependent on how much light they receive per day. The longer the dark period per day, the sooner the plant will bloom. Generally speaking, the less dark per day the better during the first six months of the plant’s life. The older the plant is before it blooms and goes to seed, the better the grass will be. After the plant is allowed to bloom, its metabolic rate is slowed so that the plant’s quality does not increase with the age at the same rate it did before it bloomed. The idea, then, is to let the plant get as old as possible before allowing it to mature so that the potency will be a high as possible at the time of harvest. One relatively sure way to keep your plants from blooming until you are ready for them is to leave the lights on all the time. Occasionally a plant will go ahead and bloom anyway, but it is the exception rather than the rule. If your plants receive 12 hours of light per day they will probably mature in 2 to 2.5 months. If they get 16 hours of light per day they will probably be blooming in 3.5 to 4 months. With 18 hours of light per day, they will flower in 4.5 to 5 months. Its a good idea to put your lights on a timer to ensure that the amount of light received each day remains constant. A “vacation” timer, normally used to make it look like you are home while you are away, works nicely and can be found at most hardware or discount stores.
Energy Emissions In Arbitrary Color Bands
40 Watt Flourescent Lamps
In Watts and Percent of Total Emissions
Daylight Cool White Gro-Lux GroLux WS
Light Type Band Watts % Watt % Watt % Watt %
~~~~~~~~~~~~ ~~~~~~~ ~~~~~~~~~~~ ~~~~~~~~~~ ~~~~~~~~~~ ~~~~~~~~~~
Ultra-Violet -380 0.186 2.15 0.16 1.68 0.10 1.42 0.27 3.16

Violet 380-430 0.832 9.60 0.72 7.57 0.70 9.67 1.07 12.48

Blue 430-490 2.418 27.91 1.98 20.78 1.96 27.07 1.22 14.29

Green 490-560 2.372 27.38 2.35 24.67 1.02 14.02 1.24 14.49

Yellow 560-590 1.259 14.53 1.74 18.27 0.10 1.42 0.83 9.77

Orange 590-630 1.144 13.21 1.69 17.75 0.44 6.05 1.36 15.93

Red 630-700 0.452 6.22 0.81 8.47 2.86 39.55 1.86 21.78

Far Red 700-780 0.130 1.53 0.07 0.81 0.06 0.80 0.69 8.10
==================== =========== ========== ========== ==========
Total 8.890 100.0 9.52 100.0 7.24 100.0 8.54 100.0

Temperature and Humidity

The ideal temperature for the light hours is 68 to 78 degrees fahrenheit and for the dark hours there should be about a 15 degree drop in temperature. The growing room should be relatively dry if possible. What you want is a resinous coating on the leaves and to get the plant to do this, you must convince it that it needs the resinous coating on its leaves to protect itself from drying out. In an extremely humid room, the plants develop wide leaves and do not produce as much resin. You must take care not to let the temperature in a dry room become too hot, however, since the plant cannot assimilate water fast enough through its roots and its foliage will begin to brown out.

Ventilation

Proper ventilation in your growing room is fairly important. The more plants you have in one room, the more important good ventilation becomes. Plants breathe through their leaves. The also rid themselves of poisons through their leaves. If proper ventilation is not maintained, the pores of the leaves will become clogged and the leaves will die. If there is a free movement of air, the poisons can evaporate off the leaves and the plant can breathe and remain healthy.

In a small closet where there are only a few plants you can probably create enough air circulation just by opening the door to look at them. Although it is possible to grow healthy looking plants in poorly ventilated rooms, they would be larger and healthier if they had a fresh supply of air coming in. If you spend a lot of time in your growing room, your plants will grow better because they will be using the carbon dioxide that you are exhaling around them. It is sometimes quite difficult to get a fresh supply of air in to your growing room because your room is usually hidden away in a secret corner of your house, possibly in the attic or basement. In this case, a fan will create some movement of air. It will also stimulate your plants into growing a healthier and sturdier stalk. Often times in an indoor environment, the stems of plants fail to become rigid because they don’t have to cope with elements of wind and rain. To a degree, though, this is an advantage because the plant puts most of its energy into producing leaves and resin instead of stems.

Dehumidifying Your Growing Room

Cannabis that grows in a hot, dry climate will have narrower leaves than cannabis grown in a humid atmosphere. The reason is that in a dry atmosphere the plant can respirate easier because the moisture on the leaves evaporates faster. In a humid atmosphere, the moisture cannot evaporate as fast. Consequently, the leaves have to be broader with more surface area in order to expel the wastes that the plant put out. Since the broad leaves produce less resin per leaf than the narrow there will be more resin in an ounce of narrow leaves than in one ounce of broad leaves. There may be more leaf mass in the broader leafed plants, but most people are growing their own for quality rather than quantity.

Since the resin in the marijuana plant serves the purpose of keeping the leaves from drying out, there is more apt to be a lot of resin produced in a dry room than in a humid one. In the Sears catalog, dehumidifiers cost around $100.00 and are therefore a bit impractical for the “hobby grower.”

Watering

If you live near a clear mountain stream, you can skip this bit on the quality of water. Most of us are supplied water by the city and some cities add more chemicals to the water than others. They all add chlorine, however, in varying quantities. Humans over the years have learned to either get rid of it somehow or to live with it, but your marijuana plants won’t have time to acquire a taste for it so you had better see that they don’t have to. Chlorine will evaporate if you let the water stand for 24 hours in an open container. Letting the water stand for a day or two will serve a dual purpose: The water will come to room temperature during that period of time and you can avoid the nasty shock your plants suffer when you drench them with cold water. Always water with room temperature to lukewarm water. If your water has an excessive amount of chlorine in it, you may want to get some anti- chlorine drops at the local fish or pet store. The most important thing about watering is to do it thoroughly. You can water a plant in a three gallon container with as much as three quarts of
water. The idea is to get the soil evenly moist all the way to the bottom of the pot. If you use a little water, even if you do
it often, it seeps just a short way down into the soil and any roots below the moist soil will start to turn upwards toward the water. The second most important thing about watering is to see to it that the pot has good drainage. There should be some holes in the bottom so that any excess water will run out. If the pot won’t drain, the excess water will accumulate in a pocket and rot the roots of the plant or simply make the soil sour or mildew. The soil, as we said earlier, must allow the water to drain evenly through it and must not become hard or packed. If you have made sure that the soil contains sand and pearlite, you shouldn’t have drainage problems. To discover when to water, feel the soil with your finger. if you feel moisture in the soil, you can wait a day or two to water. The soil near the top of the pot is always drier than the soil further down. You can drown your plant just as easily as you can let it get too dry and it is more likely to survive a dry spell than it is to survive a torrential flood. Water the plants well when you water and don’t water them at all when they don’t need it.

Bugs

If you can avoid getting bugs in the first place you will be much better off. Once your plants become infested you will
probably be fighting bugs for the rest of your plants’ lives. To avoid bugs be sure to use sterilized soil and containers and don’t bring other plants from outside into your growing room. If you have bets, ensure that they stay out of your growing room, since they can bring in pests on their fur. Examine your plants regularly for signs of insects, spots, holes in the leaves, browning of the tips of the leaves, and droopy branches. If you find that somehow in spite of all your precautions you have a plant room full of bugs, you’ll have to spray your plants with some kind of insecticide. You’ll want to use something that will kill the bugs and not you. Spider mites are probably the bug that will do the most damage to the marijuana plants. One of the reasons is that they are almost microscopic and very hard to spot. They are called spider mites because they leave a web-like substance clinging to the leaves. They also cause tiny little spots to appear on the leaves. Probably the first thing you’ll notice, however, is that your plants look sick and depressed. The mites suck enzymes from the leaves and as a result the leaves lose some of their green color and glossiness. Sometimes the leaves look like they have some kid of fungus on them. The eggs are very tiny black dots. You might be wise to get a magnifying glass so that you can really scrutinize your plants closely. Be sure to examine the underside of the leaves too. The mites will often be found clinging to the underside as well as the top of the leaves. The sooner you start fighting the bugs, the easier it will be to get rid of them. For killing spider mites on marijuana, one of the best insecticides if “Fruit and Berry” spray made by llers.
Ortho also produces several insecticides that will kill mites. The ingredients to look for are Kelthane and Malatheon. Both of these poisons are lethal to humans and pets as well as bugs, but they both detoxify in about ten days so you can safely smoke the grass ten days after spraying. Fruit and Berry will only kill the adult mite, however, and you’ll have to spray every four days for about two weeks to be sure that you have killed all the adults before they have had a chance to lay eggs. Keep a close watch on your plants because it only takes one egg laying adult to re- infest your plants and chances are that one or two will escape your barrage of insecticides. If you see little bugs flying around your plants, they are probably white flies. The adults are immune to almost all the commercial insecticides except Fruit and Berry which will not kill the eggs or larva. It is the larval stage of this insect that does the most damage. They suck out enzymes too, and kill your plants if they go unchecked. You will have to get on a spraying program just as was explained in the spider mite section.

An organic method of bug control is using soap suds. Put Ivory flakes in some lukewarm water and work up the suds into a lather. Then put the suds over the plant. The obvious disadvantage is it you don’t rinse the soap off the plant you’ll taste the soap when you smoke the leaves.

Pruning

We have found that pruning is not always necessary. The reason one does it in the first place is to encourage secondary growth and to allow light to reach the immature leaves. Some strands of grass just naturally grow thick and bushy and if they are not clipped the sap moves in an uninterrupted flow right to the top of the plant where it produces flowers that are thick with resin. On the other hand, if your plants appear tall and spindly for their age at three weeks, they probably require a little trimming to ensure a nice full leafy plant. At three weeks of age your plant should have at least two sets of branches or four leaf clusters and a top. To prune the plant, simply slice the top off just about the place where two branches oppose each other. Use a razor blade in a straight cut. If you want to, you can root the top in some water and when the roots appear, plant the top in moist soil and it should grow into another plant. If you are going to root the top you should cut the end again, this time with a diagonal cut so as to expose more surface to the water or rooting solution. The advantage to taking cuttings from your plant is that it produces more tops. The tops have the resin, and that’s the name of the game. Every time you cut off a top, the plant seeds out two more top branches at the base of the existing branches. Pruning also encourages the branches underneath to grow faster than they normally would without the top having been cut.

Harvesting and Curing

Well, now that you’ve grown your marijuana, you will want to cur it right so that it smokes clean and won’t bite. You can avoid that “homegrown” taste of chlorophyll that sometimes makes one’s fillings taste like they might be dissolving. We know of several methods of curing the marijuana so that it will have a mild flavor and a mellow rather than harsh smoke.

First, pull the plant up roots and all and hang it upside down for 24 hours. Then put each plant in a paper grocery bag with the top open for three or four days or until the leaves feel dry to the touch. Now strip the leaves off the stem and put them in a glass jar with a lid. Don’t pack the leaves in tightly, you want air to reach all the leaves. The main danger in the curing process is mold. If the leaves are too damp when you put them into the jar, they will mold and since the mold will destroy the resins, mold will ruin your marijuana. you should check the jars every day by smelling them and if you smell an acrid aroma, take the weed out of the jar and spread it out on newspaper so that it can dry quickly. Another method is to uproot the plants and hang them upside down. You get some burlap bags damp and slip them up over the plants. Keep the bags damp and leave them in the sun for at least a week. Now put the plants in a paper bag for a few days until the weed is dry enough to smoke. Like many fine things in life, marijuana mellows out with age. The aging process tends to remove the chlorophyll taste.

Editor’s Note and Important Warning:

This pamphlet was written about 8 years ago. While the facts, figures, and methods described here are still valid, an
mportant note must be added concerning the purchasing of equipment and supplies. The information age is upon us and and increasing amount of data is being kept about all of us whether we realize it or not. With the war on drugs in full effect, the D.E.A. is using this information at every possible opportunity. When you make a purchase with a credit card, every last bit of information regarding that purchase is filed away into a database, both at the store and with your credit card company. Not only the price, but the exact date, location, and items purchased are recorded and stored away. Many stores and credit card companies routinely sell their databases of customers and transactions to anybody who can afford it. The D.E.A can certainly afford it. After all, they’re using your tax dollars. The D.E.A. as well as other government agencies DO purchase these databases for their own uses. They feed them into their computers and the computers spit out a list of anybody with “suspicious” purchases. Any purchases that could be associated with drug production, use, or selling could be flagged for further investigation. These “suspicious” purchases include unusual chemicals, medical supplies such as syringes, lights and timers, and even potting soil and fertilizer. The point is, if you are planning on purchasing supplies to grow marijuana don’t take any chances. While the average home grower, who is simply growing enough for his own use, would probably never be flagged by the computers, you never know. If you are purchasing equipment or supplies, PAY CASH! In addition, many supermarkets and discount stores now have some sort of “Preferred Customer” cards. When you buy something, regardless of how you pay, you give them your card to scan and all your purchases are recorded. They then send you some sort of coupon depending on what and how much you purchased each month. It sounds like a good deal, but you wind up having all of your purchases recorded and sold just like with the credit cards. DON’T use one of these cards when you are purchasing anything that might be deemed suspicious. For that matter, don’t use them at all. They just result in a ton of junk mail and a lot of people knowing exactly what you buy and when you buy it.